Our client a leading oil and gas organization is looking for a QC Engineer to be based in Dammam Saudi Arabia who can start immediately. This role will be base in both the project site and the head office.
Responsibilities will include but not limited to
Determining product conformity to customer specification through independent inspection and tests in accordance with the Project Quality Plan.
Identify nonconformity for rectification and assure final resolution.
Appraise product quality in accordance with the Project Quality Plan and Inspection amp Test Plan and determine
Conformity and non conformity. All inspection results need to be documented and if non conformity exists documentation shall be raised to establish corrective action.
Ultimate responsible for QC inspection activities amp Client approval of the fabricated item
Prepares project Quality documentation in accordance with company policy QMS and Client requirements for approval.
Follow up on Inspection notification.
Responsible for notification with Client on daily basis.
Ensure compiling the documentation on timely basis any issue to be advised.
Provide weekly inspection status and progress to Fabrication Manager and Project Manager.
Ensure Inspection stages are witnessed
Maintain live punch point status on the server follow up for close out.
Observe if there are any to be highlighted on immediate basis and record them.
Continuous follow up with vendor for Certification dossier.
Liaise with Welding inspector and Quality supervisor for day to day work.
Responsible for issuing the IRN amp safeguarding of inspection documents MTC’s.
Carry out Internal audits and highlight the concerns to the management.
Review of MTC’s vendor documentation.
Responsible to provide QC input on MR TBE and PR as applicable
Responsible for the completion of tasks in the minimum time and ensures that compliance to the project requirements
Contribute to the creation and implementation of best practice quality vision procedures and improve operational performance
Utilize the project execution model carry out tasks given in accordance to the company policies procedures etc.
Communicate integrate and cooperate with other discipline to achieve the common goals
To be considered for this role you must meet the following criteria Bachelor’s Degree in Mechanical or Metallurgy Engineering discipline CSWIP 3.1 AWS certified welding inspector. NACE Level II or BGas Gr 2 certified inspector ASNT Level II in RT PT MT UT Experience in conducting internal audit Minimum 10 years experience in testing inspecting from a Fabrication Company Strong written and verbal English communication
اي استفسار أو طلب خاص بخصوص التوظيف يمكنك التواصل مع الابميل التالي – مجير الموقع :
لطلبات التصميم او البرمجة التواصل مع :